4 bolt flange bearing

GJP 1″ 4 Bolt Flange Bearings UCF205-16, this flange-mount ball bearing unit has four round bolt hole in each side of square flange, its like the four ear equally spaced on four angle, and in the middle of this square, there is one round ball bearing with longer inner ring insert into the housing. UCF205-16 4 bolt flange bearing has the characteristics of low friction and high load. UCF205-16 is widely used in: air cooler, bending testing machine, pressing machine, hardness tester, die cutting machine, sedimentation tank, water cutting machine, slotting machine, seam equipment, labeling machine, double beam crane and other fields.

4 bolt flange bearing UCF202-9 The overall quality is high, avoiding the trouble of repeated disassembly and maintenance of the bearing, and the overall cost performance is high. High limiting speed, low friction, low noise, strong load bearing capacity, and not easy to generate heat. 4-bolt flange bearings are suitable for: hollow glass production lines, engineering and engineering design, inkjet printers, condiment processing equipment, heat exchangers, sewage treatment equipment, frequency conversion pumps, electric welding machines, household sewing machines, workbenches, sorting screens, Electroplating equipment, glazing machine, rubber molding machine, pill making machine, plastic calendering machine, agricultural machinery parts, granulation drying equipment, etc.

4 bolt pressed steel bearing housing are used for ready-to-install surfaces and vertical bearings for guide shafts. The biggest feature of bolt pressed steel flange bearing is that the flange and the bearing are integrated. When there is no connecting piece at one end of the shaft and needs to be fixed on a flat surface such as a board or wall, 4 bolt pressed steel bearing housing shows its advantages. Single row deep groove ball bearing inserts resolve misalignment problems between the shaft and housing. The flange can facilitate the positioning during axial installation, so that there will be no slipping phenomenon. In order to play a fixed role, some bearings often need to use other components, such as adapter sleeves and bearing seats, etc., which increases the cost and is inconvenient for maintenance.

UCF201 4 hole flange bearing has a unique raceway design feature. The flange can facilitate the positioning during axial installation, so that there will be no slipping phenomenon. It has made a breakthrough in increasing the load and increasing the speed while reducing friction. In order to play a fixed role, it is often necessary to use other components, such as adapter sleeves and bearing seats, etc., which increases the cost and is inconvenient for maintenance. The appearance of 4 hole flange bearing solves this kind of problem.

4 hole flange bearing can be used in insulating glass production line, engineering and engineering design, inkjet printer, condiment processing equipment, heat exchanger, sewage treatment equipment, variable frequency pump, electric welding machine, household sewing machine, workbench, sorting screen, Plating Equipment, Glazing Machines, Rubber Molding Machines, Pellet Making Machines, Plastic Calendering Machines, Agricultural Machinery Parts, Granulating Drying Equipment, etc.

The UCF205 bearing is a square flange pillow block bearing that is widely used in mechanical equipment across various industries, including metallurgy, mining, textile, printing, chemical, food processing, and heavy machinery. This bearing is made of high-quality steel, which provides several advantages, such as high strength, wear resistance, and reliability. It can withstand significant radial and axial loads, maintain excellent stability, and reduce friction loss during high-speed rotation, ultimately increasing the service life of mechanical equipment.

The UCF 206 bearing produced by GJP is a square block bearing unit consisting of a bearing and a square block. The bearings measure 30mm x 108mm x 83mm and are able to support shafts with diameters between 20mm and 62mm. The material selection of each part of the UCF 206 bearing is very important and generally adopts materials such as cast iron, steel plate, rubber, and alloy. In addition, it also has a self-lubricating function, which is suitable for use under high-speed rotating speed and high-load working conditions. The UCF 206 bearing adopts the immersion lubrication method, which can meet the lubrication requirements in various working environments, and has high wear resistance and corrosion resistance.

1) The bearing has high speed, low friction, low noise, high load resistance, and is not easy to get hot.
Uniform speed, work in harmony with machinery, improve efficiency.
2) The bearing has an oil filling hole, which has been filled with an appropriate amount of lubricant before leaving the factory, please buckle the oil cap if it is not used.
3) Double-layer dust cover prevents the intrusion of dust and water and prolongs the service life of the bearing.
4) Built-in double top wire, the bearing is equipped with double top wire when it leaves the factory, and the bearing and shaft are used together to fix Bearing inner ring and shaft.
5) The standard bearing seat is painted with spray paint, which is delicate and beautiful, and will not fade or rust after use.

Block flange structure: UCF204 four bolt flange bearing adopts a block flange structure, which has high strength and stability and can bear large axial and radial loads.

Easy installation: UCF204 4 bolt flange bearing is easy to install, just install the bearing on the flange, and then fix the flange on the equipment, without complicated processing.

High-quality materials: UCF SERIES bearings are made of high-strength and high-hardness steel, and the surface is treated to have the characteristics of wear resistance, corrosion resistance, and high-temperature resistance, and can adapt to various complex working environments.

High-precision processing: UCF SERIES bearings adopt advanced processing equipment and technology, with high precision and stability, which can ensure the stable operation of the bearings during high-speed rotation, low noise, and long life.

A variety of sizes and models are available: UCF SERIES bearings provide a variety of sizes and models to choose from, which can meet the different needs of different equipment and are widely used in various mechanical equipment fields.

GJP’s UCF205-13 flanged bearings are affordable, high quality and can be a good replacement. And guarantee the service life.
The UCF205-13 flanged bearing is a four-bolt flanged unit with a 1-3/16″ bore bearing insert. The bearings themselves are made of high-quality chrome steel for durability and corrosion resistance. Flange units are usually mounted on a flat surface and the bearing insert is removable for maintenance. This type of flanged bearing is commonly used in industrial equipment and machinery, including conveyor systems, agricultural machinery, and more.

UCF205-14 is a 4 bolt flanged bearing with a bore diameter of 7/8″. It is commonly used in industrial and agricultural machinery, as well as conveyors and material handling equipment. GJP is a professional housed bearing factory, and our company produces UCF205 -14 housings are made of cast iron, while the bearing inserts are usually made of chrome steel or stainless steel. This bearing unit also includes a grease nipple for easy maintenance. We manufacture all 4 hole flange bearings of the UCF series, welcome to inquire

The UCF205-15 Square Flange Bearing features a square flange design for easy mounting and installation. The bearing has a bore diameter of 15/16 inches and is made of high-quality materials to ensure strength and durability. It is a type of bearing used in various mechanical applications. It is commonly used in machinery, equipment, and conveyor systems to support rotating parts and reduce friction.GJP is a bearing brand with more than ten years of experience and rich experience in mounted bearings. Our mounted bearings are reliable in quality, have strong instability, and the price is favorable.

UCF205-16 flange bearing is a square pillow block bearing with dimensions of 205mm x 34.1mm x 13.8mm. It has excellent load bearing capacity and wear resistance, suitable for various high-speed and heavy-duty applications. Additionally, UCF205-16 bearing has the advantages of easy installation and maintenance, and is widely used in machinery equipment in fields such as metallurgy, mining, chemical, and papermaking.

In the field of reliable precision engineering, the UCF217-52 set screw-locking four-bolt flange unit is the industry leader for its superior performance and durability.