Pillow Block Bearing

GJP 1 1/16″ Shaft Size Pillow Block Bearing UCP206-17 with solid base housing. Which has grease zerk on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

GJP 1 1/2″ Tight Fit J7 Pillow Block Bearing HCP208-24,which is a eccentric locking collar type, this mounted unit bearing is designed by GJP with high shaft height,long and solid bottom strong base, and for the grease fitting location, GJP could design either on 45 degree, or on the top and at the housing bottom

GJP 1 1/2″ Set Screw Locking Pillow Block Bearing Unit UCP208-24 For Welding Machine. Compared with other ordinary bearings, spherical bearing housing has a feature of double-layer sealing. Because the operating environment of the outer spherical ball bearing is relatively harsh, especially the agricultural machinery bearing, and the double-layer seal ensures that the dust is not easy to enter the inside of the channel. Spherical bearing housing is more convenient to use than ordinary angular contact ball bearings.

Bolt ball bearing units, under normal circumstances, have a large bearing capacity and can be applied to various support structures with limited installation sizes. Before the bearing is installed, an appropriate amount of grease is generally injected. Therefore, under normal circumstances, after the product installation is complete, the user does not need to enter the lubricating oil alone. The product’s cover is closed, which has the advantage of being able to seal but can slip in a small axial environment. 

GJP 1 1/4″ Mounted Unit Bearings UCP206-20 with solid base type housing. The bearing insert has a wide inner ring with two set screws for locking on the shaft. The bearing insert and housing are normally assembled with J7 tight fitting. These items are widely used.

GJP 1 1/4″ Re-lubrication Pillow Block Bearing HCP207-20 with American outer shape stype heavy duty housing, which has a feature for affording heavy duty load, and better strength capacity, the housing are produced with two higher casting near the bolt, and bolt sides could be produced according to customers’machinary requests

GJP 1 1/8″ Pillow Block Bearing HCP206-18, which is assembly with high grade quality of HT200 material cast iron housing and Abec-1 grade quality of chrome steel bearing inserts, the bearing housing has an anti-roation device which is self-aligning, and you could choose either prelube type or relube type.

GJP 1 1/8″ Solid Base Pillow Block Bearing UCP206-18. Which has grease zerk on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

GJP 1 11/16″ Pillow Block Bearing HCP209-27 For Farming Machinery, it’s a combination for one housing and one extended inner ring bearing insert, and the bearing is mainly helpful for the shaft rotation, at the same time the outside housing were helpful for affording the loading and help to assembly together with the machinery by fixing the two bolt into the equipments

GJP 1 11/16″ Standard Duty Pillow Block Bearing UCP209-27, which has grease fitting and cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

GJP 1 13/16″ Cast Iron Housing UCP210-29 with solid base housing, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

A cast iron pillow block bearing is a type of bearing that is commonly used in industrial and agricultural applications. The bearing is housed within a cast iron casing that provides both stability and protection for the rotating component within. Pillow block bearings are designed to support a shaft and keep it properly aligned, allowing it to rotate freely. They are commonly used in conveyor systems, pumps, fans, and other rotating machinery. Cast iron pillow block bearings are durable and resistant to corrosion and wear, making them well suited for harsh operating environments.

GJP 1 3/16″ 2 Bolt Pillow Block Bearings UCP206-19 with heavy duty type housing. Which has grease zerk on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

GJP 1 3/4″ Bearing Unit UCP209-28 For Cold Stamping Equipment, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

GJP 1 3/8″ Pillow Block Ball Bearing Unit UCP207-22 with solid base type housing. Which has grease fitting on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

GJP 1 5/16″ Special Pillow Block Bearing UCP207-21 with solid base type housing. Which has grease fitting on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.