GJP BEARING

Categories

News

Contact Us

Xiamen Smark Bearing Co., Ltd

Tel: +86-592-6780643/ 5975776/ 5975807/ 5975817/ 5908751/ 5908761

Fax: +86-592-6106330

Mob: +86-15306000862

Email: gjpbearings@aliyun.com

Add: NO.52 to 58, Fanghu West Road, Xiamen, China

UCF202-10 4 Bolt Bearing Housing

UCF202-10 4 Bolt Bearing Housing

1) The bearing has high speed, low friction, low noise, high load resistance, and is not easy to get hot.
Uniform speed, work in harmony with machinery, improve efficiency.
2) The bearing has an oil filling hole, which has been filled with an appropriate amount of lubricant before leaving the factory, please buckle the oil cap if it is not used.
3) Double-layer dust cover prevents the intrusion of dust and water and prolongs the service life of the bearing.
4) Built-in double top wire, the bearing is equipped with double top wire when it leaves the factory, and the bearing and shaft are used together to fix Bearing inner ring and shaft.
5) The standard bearing seat is painted with spray paint, which is delicate and beautiful, and will not fade or rust after use.

Product Details

The UCF202-10 4 bolt bearing housing consists of a cast iron flanged bearing housing, four bolt holes, and a 5/8″ ID. This ready-to-install unit requires four 3/8″ mounting bolts (sold separately). It features chrome steel bearings designed for efficient operation at all speeds. The bearing has a dynamic (radial) load rating of 12.8 kN and a static (axial) load rating of 6.65 kN. The unit is secured to the shaft with a set screw to prevent slippage. These bearings are most commonly used in mechanical equipment where the loads and shaft speeds are moderate and where the shaft and mounting surface are perpendicular to each other.

UCF202-10 4 bolt bearing housing detailed parameters

Product features: high speed, long life, high precision, low noise
Uses: agricultural machinery, mining equipment, textile machinery, packaging machinery, three-dimensional parking equipment, construction machinery and transmission equipment, etc.

Product advantages:

  1. The bearing has high speed, low friction, low noise, high load resistance, and is not easy to get hot.
    Uniform speed, work in harmony with machinery, improve efficiency.
  2. The bearing has an oil filling hole, which has been filled with an appropriate amount of lubricant before leaving the factory, please buckle the oil cap if it is not used.
  3. Double-layer dust cover prevents the intrusion of dust and water and prolongs the service life of the bearing.
  4. Built-in double top wire, the bearing is equipped with double top wire when it leaves the factory, and the bearing and shaft are used together to fix Bearing inner ring and shaft.
  5. The standard bearing seat is painted with spray paint, which is delicate and beautiful, and will not fade or rust after use.

4 bolt bearing

GJP 4 bolt bearing housing:

4 bolt flange bearing

UCF202-10

Inquiry

What is 7+4?

What is 7+4?

Related Products