1 1/4” Re-lubrication Pillow Block Bearing HCP207-20

Name: Re-Lubrication Pillow Block Bearing-Gjp Bearing
SKU: 71f72336e205

1 1/4'' Re-lubrication Pillow Block Bearing HCP207-20

SKU 71f72336e205 Category Pillow Block Bearing Tag re-lubrication pillow block bearing

Product Details

Description-11/4 Inch Bore Re-lubrication Pillow Block Bearing HCP207-20

GJP Bar Code Number: 6935329802674

GJP 1 1/4″ Re-lubrication Pillow Block Bearing HCP207-20 with American outer shape stype heavy duty housing, which has a feature for affording heavy duty load, and better strength capacity, the housing are produced with two higher casting near the bolt, and bolt sides could be produced according to customers’ machinery requests, for the insert ball bearings, GJP designed the bearing race and steel ball with case hardened entirely, and sealed with triple seal to gurantee and protect the dust entering into the bearing inside, the whole bearing unit was designed by GJP to ensure good rotation for the insert bearings together when the outer housing was locked on the machinery.

HCP207-20 are commonly used on agriculture, automotive, pumps, fan assemblies, economical housed bearing solution and many other industrial equipment.

Why Do Bearings Need Lubrication?

Reduce friction and wear. Obviously, after lubrication, the friction of the bearing will inevitably be reduced, the friction will be reduced, and the wear will naturally decrease.
Take away frictional heat. Compared with metal, lubricant has higher specific heat capacity and slower temperature rise, so it can effectively reduce the bearing temperature rise. At the same time, the flow of lubricant can conduct temperature and take away the bearing friction temperature as much as possible.
Extend the life of the bearing. The wear is reduced, the temperature rise is also reduced, and the lifespan is naturally extended.
Prevent rust. The root cause of rust is oxidation reaction. Through the isolation of oil film, the bearing metal surface is kept away from oxygen, away from oxidation reaction, and away from rust.
Prevent foreign body intrusion. Through the filling of lubricant (especially solid grease), foreign matter will not invade the bearing rolling element, such as a piece of sand, which is usually nothing, but in the high-speed rotating rolling element environment, a negligible sand, for the bearing, often fatal.

Re-lubricating pillow block bearings can provide a number of benefits, including:

– Reduced wear and tear on the bearings.

– Improved performance and lifespan of the bearings.

– Reduced friction and heat build-up.

– Reduced noise and vibration.

Interchange

GJP: HCP207-20

AMI: UGP207-20

FYH: NAP207-20

IPTCI: NAP207-20

NSK: HCP207-20

Peer: HCP207-20

NTN: UELP207-104D1

Browning: VPE-220

Dodge: P2B-SXR-104

Fafnir: RAS 1 1/4

Link Belt: P3-Y220N

Seal Master: RP-20E

Turner: HCP207-20

SKF: SY 1 1/4 WF

Basic Dimensions
Bore Size	Center Shaft to Base Size	Housing Length	Center Bolt to Bolt Size	Housing Width	Housing Bolt Length	Housing Bolt Width	Housing Height	Bolt Size
1 1/4″	47.6MM	167MM	127MM	48MM	21MM	17MM	94MM	1/2″