75mm Pillow Block Bearing UCP215 for Dry Cleaner

Description-75mm Bore Pillow Block Bearing UCP215

GJP Bar Code Number: 6935329802469

GJP 75mm Pillow Block Bearing UCP215 For Dry Cleaner, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

GJP UCP215-48 Pillow Block Bearing also focus on a good-contact, triple lip, framed structrue seal to protect against harmful contaminants and lubricant, The setscrew locking mechanism on the pillow block bearing is suitable to install and well suited for reversing applications and common loading.

Interchange

GJP: UCP215

AMI: UCP215

IPTCI: UCP215

NSK: UCP215

Peer: FHSP215G

Fafnir: RASC-75

Fafnir: YAS-75

RHP: NP-75

SKF: SY 75 TF

Technical Data for GJP UCP215

Housing No.: P215

Bearing Insert No.: UC215

Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)

Grade For Steel Ball: G10 Grade Chrome Steel Ball.

Materia of Bearing Cage: #10 Steel

Stopping Pin Material on OD of OR: Chrome Steel Gcr15

Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.

Set Screw Material: 35CrMo

Grease: 20% to 50% Mobil Grease

Set Screw Surrounding Hardness: HRC49 to HRC 50

Bearing Race and Steel Ball Hardness: HRC59 to HRC62

Bearing Housing Material: HT200 Grey Cast Iron

Housing Color: Green, Blue, Grey, Black Color available.

Whole Unit Assembly Type: J7 Tight Fitting

Housing Weight: 4.9KGS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton

GJP Sale principle:

1. We promise honest and fair, it’s our pleasure to serve you as your purchasing consultant.

2. We guarantee punctuality, quality and quantities strictly implement the terms of contract… .

FAQ

We’re USA customers, if we buy the bearing housing from GJP, we need you to produce exactly same as American style housing like IPITC etc. can you produce?

Yes, as we’ve been always producing, we are one of the factory who could produce the American styles of housing, which is thicker for the width of housing and most of the time, USA customers need the heavy duty type housing, with a little different shape for the outlooking, for the P type, normally people in USA need the solid base, anyway, no matter hanger type housing, take-up housing, flanged housing,we have full range of the American Version, which could save you a lot of money to open the new mold.