1/2” Small Size Pillow Block Bearing HCP201-8

Description-1/2 Inch Bore Pillow Block Bearing HCP201-08

GJP Bar Code Number:

GJP 1/2″ Small Size Pillow Block Bearing HCP201-08, which has green color heavy duty housing, which is cast iron material made, and there is grease fitting and cap locates on 45 degree angle of housing, and the insert bearing is made of chrome steel, which has a extended inner ring with eccentric locking collar for fixing on the shaft, and the locking collars are #45 steel made, bearing insert and housing are normally assemblied with J7 tight fitting and afford the radial direction big loading.

This HCP201-08 are widly used on wind-power machinery and outdoor sports equipment in all over the world, which need to support and afford radial direction loading.

Selection principle of small size pillow block bearing:

Small size pillow block bearing refers to the metric series, the outer diameter is less than 9mm; the inch series, the outer diameter is less than 9.525mm. The main materials are bearing steel, stainless steel, plastic, ceramics, etc. The minimum inner diameter can be 0.6mm, and the inner diameter is generally 1mm.

The correct selection of small size pillow block bearing is a very important link to exert the performance of the bearing and achieve the normal operation of the host. From a variety of bearings and housings, the following factors should be considered when selecting a suitable bearing housing that meets the requirements of the main engine.

1. The structure of the machine itself has requirements for support;
2. The space of the installation site and the size of the shaft;
3. The load on the bearing (size, direction, nature);
4. Service life and reliability requirements of bearings;
5. Working speed (high and low, forward and reverse);
6. The matching nature and fixing method of the bearing and the crankshaft;
7. Support position, configuration and size of axial expansion and contraction;
8. The matching nature of the bearing and the bearing seat;
9. Requirements for ambient temperature (high temperature, low temperature);
10. Requirements for surrounding media, dust-proof, moisture-proof, waterproof, etc.;
11. The importance of relubrication;
12. Noise and vibration requirements;
13. The strength requirements of the bearing seat.

Small size pillow block bearing is suitable for all kinds of industrial equipment, small rotary motors and other fields with high speed and low noise, such as: office equipment, micro motors, instrumentation, laser engraving, small clocks, soft drives, pressure rotors,
Dental drills, hard disk motors, stepping motors, video recorder drums, toy models, computer cooling fans, money counters, fax machines and other related fields.

Interchange

GJP: HCP201-08

AMI: UGP201-08

IPTCI: NAP201-08

NSK: HCP201-08

Peer: HCP201-08

NTN: UELP201-008D1

Browning: VPE-208

Dodge: P2B-SXR-008

Fafnir: RAS 1/2

Link Belt: P3-Y208N

Seal Master: RP-08E

FYH: NAP201-08

IPTCI: NAP201-08

SKF: SY 1/2 WF