GJP BEARING
GJP BEARING

Categories

News

Contact Us

Xiamen Smark Bearing Co., Ltd

Tel: +86-592-6780643/ 5975776/ 5975807/ 5975817/ 5908751/ 5908761

Fax: +86-592-6106330

Mob: +86-15306000862

Email: gjpbearings@aliyun.com

Add: NO.52 to 58, Fanghu West Road, Xiamen, China

1 1/16” Shaft Size Pillow Block Bearing UCP206-17

1 1/16'' Shaft Size Pillow Block Bearing UCP206-17

GJP 1 1/16″ Shaft Size Pillow Block Bearing UCP206-17 with solid base housing. Which has grease zerk on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

Share on facebook
Share on twitter
Share on linkedin

Product Details

Description-1 1/16”Bore UCP206-17 Pillow Block Bearing

GJP Bar Code Number: 6935329802124

GJP 1 1/16″ Shaft Size Pillow Block Bearing UCP206-17 with solid base housing. Which has grease zerk on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used. As a stainless pillow block bearing exporter, GJP has rich production experience, you are welcome to come and consult us.

 

Advantages of stainless pillow block bearing

  • Excellent corrosion resistance: stainless steel bearing is not easy to rust and has strong corrosion resistance.
  • Washable: The stainless pillow block bearing can be washed down without the need to re-lubricate to prevent rusting.
  • Can run in liquid: Due to the material used, we can run the bearing and bearing seat in liquid.
  • Slower depletion: 316 stainless steel does not require oil or grease for corrosion protection. Therefore, if the speed and load are low, lubrication is not necessary.
  • Hygiene: Stainless steel is naturally clean and does not corrode.
  • High heat resistance: The stainless pillow block bearing is equipped with a high temperature polymer cage or a cage without a complete complementary structure, and can operate in a higher temperature range of 180°F to 1000°F. (requires high temperature resistant grease)

 

We often have difficulties when selecting the type of equipment bearing, but so far, in many mechanical equipment, stainless pillow block bearing is still the most cost-effective. In order to ensure the performance of the bearing during use, it is necessary to purchase bearings with qualified quality and matching specifications and models. The following summarizes the three main points of stainless pillow block bearing selection.

1. Limit speed
The so-called limit speed is the working speed that the bearing can withstand. If the limit speed is exceeded, the temperature of the bearing will continue to rise when it is running, causing the lubricating oil to dry up and causing the bearing to get stuck during operation. Therefore, when choosing a bearing , the selected limit speed should be 10% higher than the speed required in the actual working environment.

2. Service life
The stainless pillow block bearing is based on the digital display of the service life. The coefficient of the bearing is 90%. Of course, not all bearings can achieve this coefficient. If the quality of the selected bearing is not good enough, it will not take long to appear. In this or that kind of problem, if you purchase regular bearings and use them correctly, you can make the bearing reach its due service life.

3. Workload
When considering the load factor, it should be noted that the service life of the stainless pillow block bearing will affect the load problem. If the bearing can bear a large load in design, but cannot rotate in actual use, it is easy to cause rolling elements of the bearing. The occurrence of corrosion and rust between the raceway and the raceway is a situation in which the bearing fails prematurely. The workload is also a part of attention when purchasing.

In addition, under certain usage environments and conditions, it is also necessary to consider the radial force, axial force and stress of related parts existing in the mechanical equipment itself.

Interchange

GJP: UCP206-17

AMI: UCP206-17

IPTCI: UCP206-17

NSK: UCP206-17

Peer: FHSP206-17G

Fafnir: RASC-1 1/16”

Fafnir: YAS-1 1/16”

RHP: NP-1 1/16”

SKF: SY 1 1/16”TF

Sealmaster: NP-17

 

1 1/16” Shaft Size Pillow Block Bearing UCP206-17

Basic Dimensions

Bore Size

Center Shaft to Base Size

Housing Length

Center Bolt to Bolt Size

Housing Width

Housing Bolt Length

Housing Bolt Width

Housing Height

Bolt Size

1 1/16″

42.9MM

165MM

121MM

48MM

21MM

17MM

83MM

1/2″

 

Technical Data for GJP UCP206-17

Housing No.: P206

Bearing Insert No.: UC206-17

Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)

Grade For Steel Ball: G10 Grade Chrome Steel Ball.

Materia of Bearing Cage: #10 Steel

Stopping Pin Material on OD of OR: Chrome Steel Gcr15

Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.

Set Screw Material: 35CrMo

Grease: 20% to 50% Mobil Grease

Set Screw Surrounding Hardness: HRC49 to HRC 50

Bearing Race and Steel Ball Hardness: HRC59 to HRC62

Bearing Housing Material: HT200 Grey Cast Iron

Housing Color: Green, Blue, Grey, Black Color available.

Whole Unit Assembly Type: J7 Tight Fitting

Housing Weight: 0.97KGS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton

 

1 1/16” Shaft Size Pillow Block Bearing UCP206-17

1 1/16” Shaft Size Pillow Block Bearing UCP206-17

1 1/16” Shaft Size Pillow Block Bearing UCP206-17

 

GJP advantage:

GJP is excellent in processing the gray iron material products, especially for the thin-wall casting, GJP could cast very good surface of thin-wall castings, which is normally not easy to control for sand castings, but we made suitable technology and are able to guarantee smooth no-defect surface and could have a less NG products after machining.

 

FAQ

Which is the nearest loading port from your factory’s location?

Normally our loading port is Xiamen Port, which is nearby our factory, but if customer wanna us to ship from Ning Port or Shanghai Port to combine with other of their cargo, we would ship our consignments to the assigned port you need, and for the Chinese domestic transportation charge cost by shipping from Xiamen to other ports, we’ll evaluate, if the cost is affordable by us, then we would not charge customers’ additional fee, but if it’s too costy, then we would need our buyers to afford part of the fee, as you know, our Cast Iron Bearing units are always very heavy, and it would take more cost during transportation.

Inquiry

Related Products