2” Set Screw Locking Pillow Block Unit UCP211-32

Description-2”Bore 2 Pillow Block Bearing Unit UCP211-32

GJP Bar Code Number: 6935329800670

GJP 2″ Set Screw Locking 2 Pillow Block Bearing Unit UCP211-32, which has grease fitting and cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

2 pillow block bearing is a kind of bearing unit that combines rolling bearing and bearing seat. It is to install the rolling bearing and the machined bearing seat together to form a bearing unit with various structures, good versatility and interchangeability. We can custom 2 pillow block bearing according to customer’s demand.

The 2 pillow block bearing series also features rib-guided recessed R-ring seals designed to keep out harmful contaminants and retain lubricant. Extended inner ring bearings are used when space is sufficient and overturning loads are not an issue.

The 2 pillow block bearing unit is equipped with a locking device which is locked to the shaft by two set screws in the inner ring. The screws are positioned at a 90-degree angle to optimize the balance between axle holding force and cone rotation.

Features of 2 pillow block bearing:

1. Effectively reduce the friction coefficient of mechanical loads during the transmission process of mechanical equipment;
2. Strong versatility, stable installation, convenient loading and unloading;
3. Large load capacity and low working noise;
4. Long service life;
5. Good sealing performance.

Maintenance of 2 pillow block bearing:

1. In principle, the bearing cover of the deep groove ball housed bearing is sealed with grease and does not require additional lubrication.
2. The grease of the needle roller thrust ball housed bearing and the back combined type housed bearing is not sealed, and should be lubricated and maintained regularly during use.

Frequently asked questions and analysis:

1. The uneven mounting surface will cause the difference in the center height of the bearing with the seat, which will cause locking, increase the friction, increase the heat generation, and reduce the service life.
2. Bearings with seats of deep groove ball bearings can bear large radial force, but the bearing axial force is limited. Avoid bearing axial force as much as possible. To bear axial force and radial force, the back combination can be purchased type or needle roller thrust ball housed bearings.
3. Bearings are precision mechanical parts, and impact should be avoided as much as possible during use, so as not to cause damage to the track surface or balls, which will increase the friction of the bearing, increase the heat generation, and reduce the service life.
4. There are different types of dust cover for the bearing with seat, choose the correct one according to the needs in use.

Interchange

GJP: UCP211-32

AMI: UCP211-32

IPTCI: UCP211-32

NSK: UCP211-32

NTN: UCP211-200D1

Peer: FHSP211-32G

Fafnir: RASC-2”

Fafnir: YAS-2”

RHP: NP-2”

SKF: SY 2”TF

Sealmaster: NP-32

Technical Data for GJP 2 pillow block bearing UCP211-32

Housing No.: P211

Bearing Insert No.: UC211-32

Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)

Grade For Steel Ball: G10 Grade Chrome Steel Ball.

Materia of Bearing Cage: #10 Steel

Stopping Pin Material on OD of OR: Chrome Steel Gcr15

Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.

Set Screw Material: 35CrMo

Grease: 20% to 50% Mobil Grease

Set Screw Surrounding Hardness: HRC49 to HRC 50

Bearing Race and Steel Ball Hardness: HRC59 to HRC62

Bearing Housing Material: HT200 Grey Cast Iron

Housing Color: Green, Blue, Grey, Black Color available.

Whole Unit Assembly Type: J7 Tight Fitting

Housing Weight: 2.4KGS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton

FAQ

If we’re the dealer for GJP bearing, can we be the dealer for other Chinese brand bearing?

If we wanna to choose one GJP dealer in your market, then we would not give other people to be our agent in your country again, the reason why we wanna to do like this, that’s because we wanna our dealer concentrate more on our bearing promotion, and enjoy higher market share and profits for our brand, so at this points, we also need our dealers to deals only one Chinese brand, which is GJP, if you are the agent of other Chinese brand, then your salesman would not focus on one brand, then it’s not good for you and us, this is our ideas, of course, you could deal with other brands besides China like INA, Timken, SKF, NACHI, KOYO, IKO etc.