Rolamento de mancal de 2 1/4” UCP212-36 para máquina de dobragem de bolso

Description-2 1/4”Bore Pocket Welting Machine Pillow Block Bearing Unit UCP212-36

GJP Bar Code Number: 6935329802315

GJP 2 1/4″ Pocket Welting Machine Pillow Block Bearing UCP212-36 For Pocket Welting Machine, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

Pocket welting machine pillow block bearing is used in harsh environments, and requires long life, high speed, low noise, high temperature resistance, and stable operation. The pocket welting machine pillow block bearing developed by GJP has outstanding performance and has been supplied to many domestic welding machine factories. And can rotate smoothly at high speed, it has the characteristics of small amplitude, low noise, long service life, convenient maintenance and so on.

Intercâmbio

GJP: UCP212-36

AMI: UCP212-36

IPTCI: UCP212-36

NSK: UCP212-36

Peer: FHSP212-36G

Fafnir: RASC-2 1/4”

Fafnir: YAS-2 1/4”

RHP: NP-2 1/4”

SKF: SY 2 1/4”TF

Technical Data for GJP UCP212-36

Housing No.: P212

Bearing Insert No.: UC212-36

Material do inserto do mancal: aço cromado 100% Gcr15 (AISI 52100)

Grau para esfera de aço: Esfera de aço cromado de grau G10.

Material da gaiola do rolamento: aço #10

Material do Pino de Parada no DE de OR: Aço Cromado Gcr15

Tipo de vedação: Vedação F, Vedação L3 e Vedação NBR normal estão disponíveis para seleção dos clientes.

Material do parafuso de fixação: 35CrMo

Graxa: 20% a 50% Mobil Grease

Dureza ao redor do parafuso de ajuste: HRC49 a HRC 50

Pista do rolamento e dureza da esfera de aço: HRC59 a HRC62

Material da carcaça do mancal: ferro fundido cinza HT200

Cor da carcaça: Verde, Azul, Cinza, Preto Cor disponível.

Tipo de conjunto de unidade inteira: J7 encaixe apertado

Housing Weight:2.8KGS

Quality Control: Under ISO:9001:2008 Certificate

Pacote: 1 * 1 saco poli GJP único + 1 * 1 caixa colorida GJP + 1 * 1 caixa externa GJP

Perguntas frequentes

Can you teach us that when bearing is on working, sometimes it broken, how come this happen?

About this question, I think there are many issues to cause the bearings fail, one of the big reason is the loading weight, before you purchase the bearings, it is better that you could know what’s the loading requirements for the bearings you need, please make sure that your bearings did not afford over-loading, some users, when the loading capacity requirements are too big, they would use a plummer block, or a Cast Iron Housing or Just a bushing, or they consider to use the full complement bearings without rolling elements. This is one reason, and another reason, you might assembly the bearings with the wrong way, and make the wrong torque in wrong direction, which cause the fails of thrust or radial load.