GJP BEARING
GJP BEARING

Categories

News

Contact Us

Xiamen Smark Bearing Co., Ltd

Tel: +86-592-6780643/ 5975776/ 5975807/ 5975817/ 5908751/ 5908761

Fax: +86-592-6106330

Mob: +86-15306000862

Email: gjpbearings@aliyun.com

Add: NO.52 to 58, Fanghu West Road, Xiamen, China

Products

bearing unit for sold stamping equipment

1 3/4” Bearing Unit UCP209-28 for Cold Stamping Equipment

GJP 1 3/4″ Bearing Unit UCP209-28 For Cold Stamping Equipment, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

see more
pillow block ball bearing unit

1 3/8” Pillow Block Ball Bearing Unit UCP207-22

GJP 1 3/8″ Pillow Block Ball Bearing Unit UCP207-22 with solid base type housing. Which has grease fitting on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

see more
special pillow block bearing

1 5/16” Special Pillow Block Bearing UCP207-21

GJP 1 5/16″ Special Pillow Block Bearing UCP207-21 with solid base type housing. Which has grease fitting on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

see more
fyh structure pillow block bearing

1 5/8” FYH Structure Pillow Block Bearing UCP209-26

GJP 1 5/8″ FYH Structure Pillow Block Bearing UCP209-26, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

see more
slinger seal pillow block bearing

1 7/16” Slinger Seal Pillow Block Bearing UCP207-23 FYH Type

GJP 1 7/16″ Slinger Seal Pillow Block Bearing UCP207-23 FYH type, Which has grease fitting on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

see more
pillow block bearing shaft

1 7/8” Pillow Block Bearing Shaft UCP210-30

GJP 1 7/8″ Pillow Block Bearing Shaft UCP210-30, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

see more
selflube pillow block bearing

1 9/16” Selflube Pillow Block Bearing UCP208-25

GJP 1 9/16″ Selflube Pillow Block Bearing UCP208-25 with Heavy Duty type housing, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

see more
1 inch pillow block bearing

1 inch pillow block bearing

The UCPX05-16 pillow block bearing is a bearing assembly consisting of a housing and a rolling bearing. The pillow block bearing makes the external structure of the machine simpler, which also makes it more reasonable in terms of assembly and maintenance.

see more
Heavy Duty Stainless Steel Pillow Block

1-1/2″ SUS304 Heavy Duty Stainless Steel Pillow Block MUCP208-24

Aligning: Non-Aligning Bearing
Separated: Separated
Feature: Corrosion Resistant, High Temperature
Material: Pillow block: SUS304 full Stainless Steel + Bearing: SUS440Bearing Block Model: SS P208
Packing: 1*1 GJP polybag+1*1 GJP colorbox+1*1 outer carton

see more
stainless steel insert ball bearing

1-1/4″ Stainless Steel Ball Bearing Insert SS UC207-20

GJP 1-1/4" SSUC207-20 bearing is a Stainless Steel Insert Set Screw Ball Bearing with Lubricating Groove Access, Sealed and Pre-Lubricated, Spherical Outer to Insert in Housing. UC207-20 Stainless Steel Ball Bearing Inserts have a combination of common and unusual bearing characteristics….

see more
ball bearing units

1.25 inch pillow block bearings

The 1.25 inch pillow block bearing refers to the model number Ucpx06 Bearing, which has a shaft diameter of 1.25inch, 30mm. the material that can be used for the bearing is chrome steel GCR15, we use the highest quality steel, the highest standards of contact surface design and the highest standards

see more
1.5 inch pillow block bearing

1.5 inch pillow block bearing

GJP’s 1.5-inch housing bearing is a well-known brand in the Chinese market, and GJP has steadily expanded into foreign markets. Installing a single thrust ball bearing, installing a thrust ball bore, etc. has successfully marketed every product both domestically and internationally.

see more
1.75 pillow block bearing

1.75 pillow block bearing

The size of the housing bearing shaft is 1.75 inches, of course we have other UCPX series, you can find the size you want. Bearing inserts are available with optional bushings and bumpers; enclosed bearing design allows lower installation costs through the use of end support shafts. Bearing Ball Material: Mainly cast iron material, these bearings have more than 10 times the load capacity of standard mounting. There are also other ranges of pillow block bearings available in materials such as bronze sleeve bearings, sintered bronze, sintered iron and plastic.

see more
square flange bearing

1” 4-Bolt Flange Mounted Bearings UCF205-16

GJP 1″ 4-Bolt Flange Mounted Bearings UCF205-16, this flange-mount ball bearing unit has four round bolt hole in each side of square flange, its like the four ear equally spaced on four angle, and in the middle of this square, there is one round ball bearing with longer inner ring insert into the housing. UCF205-16 4 bolt flange bearing has the characteristics of low friction and high load. UCF205-16 is widely used in: air cooler, bending testing machine, pressing machine, hardness tester, die cutting machine, sedimentation tank, water cutting machine, slotting machine, seam equipment, labeling machine, double beam crane and other fields.

see more
1 ductile material flange bearing housing27236423204 1

1” Ductile Material Flange Bearing Housing Unit SBTRD205-16

GJP high tensile strength requirement flanged bearing SBTRD205-16 is mainly applied on the automobile field, and we design this bearing with narrow extended inner ring, two set screws 120 degree spaced on the outer diameter of inner ring for the purpose of tightening the bearing into the shaft

see more
hanger bearing

1” Hanger Bearing UCHA205-16

GJP 1″ Hanger Type Mounted Unit Bearing UCHA205-16, it has the biggest feature with one screw bolt hole and cylindrical shape, which is mainly for the conveyors application, so we call it screw conveyor hanger bearing also,and we could call it another kind of take-up bearing

see more