Categories
News
Contact Us
Xiamen Smark Bearing Co., Ltd
Tel: +86-592-6780643/ 5975776/ 5975807/ 5975817/ 5908751/ 5908761
Fax: +86-592-6106330
Mob: +86-15306000862
Email: gjpbearings@aliyun.com
Add: NO.52 to 58, Fanghu West Road, Xiamen, China
GJP Dental Bearing S418MCKHH is mainly for high-speed hand piece, which could rotate at the speed of 400,000RPM, replaceable with the dental hand pieces produced in Japan, Germany and UK etc., at the normal working condition, the clinical service life is no less than six months
GJP Bar Code Number: 6935329838093
GJP Ceramic Dental Precision Bearings S418MCKHH is mainly for high-speed hand piece, which could rotate at the speed of 400,000RPM, replaceable with the dental hand pieces produced in Japan, Germany and UK etc., at the normal working condition, the clinical service life is no less than six months, the high-speed dental drill ball bearing is a kind of precision miniature bearing, thus the careful installation and use, meticulous operation and elaborate maintenance are requested, otherwise it’s performance and working life will be affected directly. For instance, the damage of ball and groove by the impulsive load during the bearing assembly or improper lubrication, regard to the bearing installation, the interference fit of the shaft, and bearing bore is preferred to be within 0-2um. The roundness deviation of the shaft shall be less than 2um. when the shaft is pressed into the bearing bore, the acting force shall be directly on the end face of inner ring. The force shall not pass through the ring raceway groove or the steel ball, otherwise the bearing precision will be damaged.
After a pair of bearings are installed on the turbine, the bearing and the turbine shall be cleaned, then drop the lubricating oil. At the moment, they can be mounted in the head (never use the alcohol or acetone as the cleaning liquid). In order to ensure the high speed, after mounting in the head, apply some axial preload on the pair of bearings. The load is 1-2N After the finish of installation, the shaft shall not have the axial moving. The rotation of the bearing shall be flexible. If the axial preload is too tight or loose, replace the washer or add or remove the gasket, so as to ensure the correct preload, in case of the revolution skidding or top-like rotation of steel ball at the high speed.The maintenance of turbine head is very important for the normal working and long service life of the bearing. In the clinical use in the hospital, besides the daily disinfection.
The daily cleaning and maintenance shall be done to the turbine head. Before the use, demount it and apply the cleaning liquid, then mount it, and fix the drill bit by hand instead of rotating. Ventilate the compressed air for some seconds. Use it after the bearing is cleaned and lubricated by the compressed air.
GJP supplies ceramic dental precision bearings, if you are interested in our products, you are welcome to inquire.
GJP Code |
Dimensions |
Speed Limited |
Air pressure |
Noise |
||
d |
D |
B |
rpm |
MPa |
dB |
|
S418MCKHH |
3.175 |
6.35 |
2.78 |
350000 to 400000 |
0.2 to 0.25 |
not more than 70dB |
Dental Bearing No.: S418MCKHH
Material For Bearing: 100% Chrome Steel material(Gcr15 material)
Grade For Steel Ball: Si3N4 Ceramic Ball.
Cage Material: Nylon cage
Sealing Type: One side with NBR rubber seal, another side with Z shield.
Grease: High Speed Grease.
Bearing Race and Steel Ball Hardness: HRC59 to HRC60
Bearing Precision: Abec-7
Quality Control: Under ISO: 9001: 2008 Certificate
Package: GJP plastic Tube packing(50pcs/tube)+ GJP color box+1*1 GJP outer carton
Contact Us
Copyright © 2023 Xiamen Smark Bearing Co., Ltd. All Rights Reserved.