Ceramic Hybrid Deep Groove Ball Bearing 6204 TN9/C3 for Racing Car

Description-Hybrid Ceramic deep groove ball bearing for racing car 6204 TN9/C3

GJP Bar Code Number: 6935329839274

GJP provide the ceramic deep groove ball bearing for racing car with Only Ceramic Ball of Ball Bearing, which is Hybrid Ceramic Ball Bearing, and for this item 6204TN9/C3, GJP has been supplying with Si3N4 ceramic ball, which is from Saint-Gobain Company in Germany, and G5 grade quality level for ceramic ball, and super heat-resisting bearing race, special heat treatment and production technology, nylon cage, and make sure our bearings could have 4 times on life-duaration.

GJP mainly supply this bearing for racing car, which requires GJP bearing with the feature of low density, high speed, good abrasion resistant, high precision.

Deep groove ball bearing for racing car is the most widely used kind of rolling bearing. It is characterized by low frictional resistance and high rotational speed, and can be used on parts bearing radial loads or combined loads acting simultaneously in radial and axial directions, and can also be used on parts bearing axial loads.

How deep groove ball bearing for racing car works

Deep groove ball bearings mainly bear radial load, and can also bear radial load and axial load at the same time. When it is only subjected to radial load, the contact angle is zero. When the deep groove ball bearing for racing car has a large radial clearance, it has the performance of an angular contact bearing and can bear a large axial load. The friction coefficient of the deep groove ball bearing is very small, and the limit speed is also high.

Features of deep groove ball bearing for racing car

Deep groove ball bearings are the most commonly used rolling bearings. It has a simple structure and is easy to use. It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain performance of angular contact ball bearing and can bear combined radial and axial loads. It can also be used to bear pure axial load when the rotational speed is high and the thrust ball bearing is not suitable. Compared with other types of bearings with the same size and size as deep groove ball bearings, this type of bearing has a small friction coefficient and a high limit speed. However, it is not resistant to impact and is not suitable for bearing heavy loads.

After the deep groove ball bearing is mounted on the shaft, within the axial clearance range of the bearing, the axial displacement of the shaft or the housing can be limited in two directions, so it can be axially positioned in both directions. In addition, this type of bearing also has a certain self-aligning ability. When it is inclined 2′ to 10′ relative to the housing hole, it can still work normally, but it has a certain impact on the bearing life.

Technical Data

Bearing No.: 6204 TN9/C3.

Material For Bearing: 52100 steel or stainless steel AISI440C.

Material For Steel Ball: Si3N4(Silicon Nitride material).

Cage Material: PA66 nylon cage or Peek Cage or full ball without cage.

Sealing Type: open type for this item.

Grease: None.

Grease Volumn:none.

Bearing Race: HRC59 to HRC62.

Bearing Precision:Abec-5 or Abec-7, Abec-9.

Quality Control: Under ISO:9001:2008 Certificate.

Package:1*1 GJP poly bag+1*1GJP color box+GJP outer carton+Composite Wooden Pallet.