3” Pillow Block Bearing UCP215-48 for Belt Cutting Machine

Description-3”Bore Pillow Block Bearing For Belt Cutting Machine UCP215-48

GJP Bar Code Number: 6935329802452

GJP 3″ Pillow Block Bearing For Belt Cutting Machine UCP215-48, Which has grease fitting and Cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws located in the inner race for locking on the shaft, it could be either on 90 degree angle or 45 degree agnle, and this unit is relube type and with full width inner ring for more stability, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used on Construction, Conveyors, Food and Beverage, Packing and other Industrial Equipment.

Pillow Block Bearing For Belt Cutting Machine plays a supporting role. If the transmission parts (such as shafts) are directly matched with the holes, the transmission resistance will be large, and the transmission parts will not be easy to be replaced after wear and tear, and the bearings rely on the components. The rolling contact between them supports the transmission parts, so the sliding resistance is small, the power consumption is low, and the starting is easy. GJP specializes in Pillow Block Bearing For Belt Cutting Machine, if you are interested in our products, please contact us.

Interchange

GJP: UCP215-48

AMI: UCP215-48

IPTCI: UCP215-48

NSK: UCP215-48

Peer: FHSP215-48G

Fafnir: RASC-3″

Fafnir: YAS-3″

RHP: NP-3″

SKF: SY 3″ TF

Technical Data for GJP UCP215-48

Housing No.: P215

Bearing Insert No.: UC215-48

Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)

Grade For Steel Ball: G10 Grade Chrome Steel Ball.

Materia of Bearing Cage: #10 Steel

Stopping Pin Material on OD of OR: Chrome Steel Gcr15

Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.

Set Screw Material: 35CrMo

Grease: 20% to 50% Mobil Grease

Set Screw Surrounding Hardness: HRC49 to HRC 50

Bearing Race and Steel Ball Hardness: HRC59 to HRC62

Bearing Housing Material: HT200 Grey Cast Iron

Housing Color: Green, Blue, Grey, Black Color available.

Whole Unit Assembly Type: J7 Tight Fitting

Housing Weight: 4.9KGS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton

GJP advantage:

GJP has the technology advantage, we are and innovation-driven company, which we are competitive in our casting, our automatic casting production line workshop provide our customers with the stable housing quality, especially the good finishing and outlooking on the housing, ours have less sand-oil, less-spur, and smoother outer diameter on housing.

FAQ

How’s your Pillow Block Bearing quality compared with Asahi company?

GJP bearing have the same design and dimension with Asahi, which have blue color grease fitting cap, heavy duty housing, HT200 to HT250 grey cast iron, high quality for the bearing insert, but as Japanese steel material may have difference data with Chinese steel, there might be a little difference for GJP bearing and Asahi, but as Pillow Block Bearings are normally used on construction, agricultural and industry conveyor equipment, which requires lower RPM speed and not so high requirements environments, so we’re sure that our quality level could fully meet customer and end users’ machinery needs, so don’t worry about that.