15mm Metric Bore Pillow Block Bearing UCP202

Description-15mm Metric Bore UCP202 Pillow Block Bearing

GJP Bar Code Number: 6935329802032

GJP good quality 15mm Metric Bore Pillow Block Bearings with solid base housing and radial insert ball bearing with grub set screw to lock to the shaft. Which is smaller size and has grease zerk on 45 degree angle, and the insert bearing has a wide inner ring with spherical outer diameter, bearing insert and housing are normally assemblied with J7 tight fitting.

The distinction between metric bore pillow block bearing and inch bearings is the measurement unit of the bearing. Many customers will not be very clear about the distinction between these two “systems”, but the metric system and the inch system can also be seen in the model.

The metric bore pillow block bearing is also known as metric bearing. The unit of metric bore pillow block bearing is composed of mm, cm, and m.

The inch bearing is a British-made bearing that supports the mechanical rotating body and reduces the friction coefficient during its movement. The temperature of the inch bearing starts to rise slowly with the operation of the bearing, and reaches a stable state after 1-2 hours. The normal temperature of the bearing varies with the heat capacity, heat dissipation, speed and load of the machine.

How to distinguish between metric bore pillow block bearing and inch bearings

Distinguish between metric bore pillow block bearing and imperial shaft, above, it is the unit of measurement for bearings, many customers will not be very clear about the distinction between these two “systems”, but both metric and imperial can also be seen on the model.

15mm metric bore pillow block bearing is also called metric bearing, and the unit of metric bearing is composed of mm, cm, m and so on.

Inch bearings are British-made bearings that support the mechanical rotating body and reduce the coefficient of friction during its motion. The temperature of the inch bearing starts to rise slowly with the operation of the bearing, and reaches the temperature after 1-2 hours.
to a steady state. The normal temperature of the bearing varies with the heat capacity, heat dissipation, speed and load of the machine.

Interchange

GJP: UCP202

AMI: UCP202

IPTCI: UCP202

NSK: UCP202

Peer: FHSP202G

Fafnir: RASC-15

Fafnir: YAS-15

RHP: NP-15

SKF: SY 15 TF

Sealmaster:

Technical Data for GJP UCP202

Housing No.: P203

Bearing Insert No.: UC202

Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)

Grade For Steel Ball: G10 Grade Chrome Steel Ball.

Materia of Bearing Cage: #10 Steel

Stopping Pin Material on OD of OR: Chrome Steel Gcr15

Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.

Set Screw Material: 35CrMo

Grease: 20% to 50% Mobil Grease

Set Screw Surrounding Hardness: HRC49 to HRC 50

Bearing Race and Steel Ball Hardness: HRC59 to HRC62

Bearing Housing Material: HT200 Grey Cast Iron

Housing Color: Green, Blue, Grey, Black Color available.

Whole Unit Assembly Type: J7 Tight Fitting

Housing Weight: 0.33KGS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton

GJP Advantage:

GJP has the fast and accurate sorting per customer request, which request GJP to have the extensive production experience and great engineers teams, and our bearing production engineer team all have more than 20 years working time in our factory.

GJP could produce the belowing SAP type Pillow Block Bearing also: