GJP BEARING
GJP BEARING
china
MADE IN CHINA
GJP BEARING

Categories

News

Contact Us

Xiamen Smark Bearing Co., Ltd

Tel: +86-592-6780643/ 5975776/ 5975807/ 5975817/ 5908751/ 5908761

Fax: +86-592-6106330

Mob: +86-15306000862

Email: gjpbearings@aliyun.com

Add: NO.52 to 58, Fanghu West Road, Xiamen, China

1” High Grade Chrome Steel Insert Ball Bearing UC205-16

high grade chrome steel insert ball bearing
high grade chrome steel insert ball bearing
high grade chrome steel insert ball bearing
high grade chrome steel insert ball bearing
1'' High Grade Chrome Steel Insert Ball Bearing UC205-16

GJP 1”Bore Insert Bearing UC205-16 has the feature with the spherical outer diameter, one oil groove cycling on one surface of outside, one stop pin in another side of OD for assembly with housing, and there are two oil hole in the oil groove for better relubrication, inside the bearings, there are same structure with the radial deep groove ball bearings

SKU 3fdb08279bb1 Category Tag

Send Inquiry
Share on facebook
Share on twitter
Share on linkedin

Product Details

Description-1 Inch Insert Chrome Ball Bearings UC205-16

GJP Bar Code Number: 6935329835610

GJP 1”Bore Insert chrome ball bearings UC205-16 has the feature with the spherical outer diameter, one oil groove cycling on one surface of outside, one stop pin in another side of OD for assembly with housing, and there are two oil hole in the oil groove for better relubrication, inside the bearings, there are same structure with the radial deep groove ball bearings, the difference is the extended inner race for bearing insert, and on the OD of IR, there are two set screws spaced in 120 degree location for better fixing on the shaft. There is a radial internal clearance ranges from 0.012 to 0.028, pre-greased with Shell Alvania 2# for the volumn with 30% to 40%, the sealing structure is NBR rubber seal cover on one #08 steel plate, which makes into one set for protect the dust from outside the bearings.

GJP UC205-16 are mainly assemblied with many pillow block housing, 2-bolt flanges, 3-bolt flanges, 4-bolt flanges, take up units , etc. Saving money for replacing the insert bearing instead of replacing the whole unit and are also widely used among agriculture, construction, textile, conveyor, foods, printing industries.

Chrome steel is the most common bearing material, chrome ball bearings are cheaper and harder than stainless steel, so they last longer.

Chrome steel is the most common bearing material, chrome ball bearings are cheaper and harder than stainless steel, so they last longer. Chrome ball bearings are suitable for large machinery with high speed and high load; they can also be used to manufacture mechanical parts with high load, high wear resistance, high elastic limit and high contact fatigue strength, as well as various precision measuring tools, cold stamping dies, general tools, etc. ; After carbonitriding, it can be used to manufacture parts with high wear resistance, heat resistance and requirements of dimensional stability and long service life.

 

Interchange

GJP: UC205-16

AMI: UC205-16

Browning: VS-216

Dodge: INS-SC-100

Fafnir: GY1100KRRB

FYH: UC205-16

IPTCI: UC205-16

Link-Belt: UG216NL

NTN: UC205-100D1

PEER: UC205-16

SKF: YAR205-100-2F

Sealmaster: 2-1

1” High Grade Chrome Steel Insert Ball Bearing UC205-16

Unit Bore Dia. Main Dimensions Dynamic Loading Rating (Lbs) Static Load Rating(Lbs)
d D Bi Be n m G ds
Inch 1 2.0472 1.3425 0.6693 0.563 0.7795 0.2165 1/4-28UNF 3086 1742
mm 25.4 52 34.1 17 14.3 19.8 5.5 M6x1.0

Technical Data for GJP UC205-16

Bearing Insert No.: UC205-16

Material For Bearing Insert: 100% Chrome Steel material(Gcr15 material)

Grade For Steel Ball: 100% Chrome Steel material(Gcr15 material) with G10 grade under standard GB308-89

Bearing Cage Material: #08 steel cage.

Set Screw Material: 35CrMo

Rivit Material: ML15 material.

Sealing Type: NBR rubber seal+08 steel plate.

Grease: 30% to 40% Shell Alvania 2# Grease.

Bearing Race and Steel Ball Hardness: HRC59 to HRC60

Bearing Weight: 0.42LBS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton

1” High Grade Chrome Steel Insert Ball Bearing UC205-16

1” High Grade Chrome Steel Insert Ball Bearing UC205-16 1” High Grade Chrome Steel Insert Ball Bearing UC205-16

1” High Grade Chrome Steel Insert Ball Bearing UC205-16

GJP also produce the belowing Insert Ball Bearings:

GJP Bearing No. Shaft Dia Dimensions(mm)/(in.) Basicload rating(N) Mass (kg)
d D B C S S1 G h ds Dynamic Cr Static Cor
(in.) (mm)
UC201 12 47 27.4 14 11.5 15.9 4.2 3.5 M5X0.8 9550 4780 0.12
UC201-8 1/2 47 27.4 14 11.5 15.9 4.2 3.5 M5X0.8 9550 4780 0.12
UC202 15 47 27.4 14 11.5 15.9 4.2 3.5 M5X0.8 9550 4780 0.12
UC202-10 5/8 47 27.4 14 11.5 15.9 4.2 3.5 10#-32UNF 9550 4780 0.12
UC203 17 47 27.4 14 11.5 15.9 4.2 3.5 M5X0.8 9550 4780 0.11
UC203-11 11/16 47 27.4 14 11.5 15.9 4.2 3.5 10#-32UNF 9550 4780 0.11
UC204-12 3/4 47 31 16 12.7 18.3 4.7 4.4 1/4-28UNF 12800 6650 0.19
UC204 20 47 31 16 12.7 18.3 4.7 4.4 M6X1 12800 6650 0.17
UC205-14 7/8 52 34 17 14.3 19.7 5.5 4.3 1/4-28UNF 14000 7880 0.23
UC205-15 15/16 52 34 17 14.3 19.7 5.5 4.3 1/4-28UNF 14000 7880 0.22
UC205 25 52 34 17 14.3 19.7 5.5 4.3 M6X1 14000 7880 0.21
UC205-16 1 52 34 17 14.3 19.7 5.5 4.3 1/4-28UNF 14000 7880 0.2
UC206-18 1 1/8 62 38.1 19 15.9 22.2 5.5 5 1/4-28UNF 19500 11200 0.34
UC206 30 62 38.1 19 15.9 22.2 5.5 5 M6X1 19500 11200 0.32
UC206-19 1 3/16 62 38.1 19 15.9 22.2 5.5 5 1/4-28UNF 19500 11200 0.31
UC206-20 1 1/4 62 38.1 19 15.9 22.2 5.5 5 1/4-28UNF 19500 11200 0.3
UC207-20 1 1/4 72 42.9 20 17.5 25.4 6.5 5.8 5/16-24UNF 25700 15200 0.53
UC207-21 1 5/16 72 42.9 20 17.5 25.4 6.5 5.8 5/16-24UNF 25700 15200 0.51
UC207-22 1 3/8 72 42.9 20 17.5 25.4 6.5 5.8 5/16-24UNF 25700 15200 0.48
UC207 35 72 42.9 20 17.5 25.4 6.5 5.8 M8X1 25700 15200 0.47
UC207-23 1 7/16 72 42.9 20 17.5 25.4 6.5 5.8 5/16-24UNF 25700 15200 0.45
UC208-24 1 1/2 80 49.2 21 19 30.2 8 6.3 5/16-24UNF 29600 18200 0.68
UC208-25 1 9/16 80 49.2 21 19 30.2 8 6.3 5/16-24UNF 29600 18200 0.65
UC208 40 80 49.2 21 19 30.2 8 6.3 M8X1 29600 18200 0.64
UC209-26 1 5/8 85 49.2 22 19 30.2 8 6.8 5/16-24UNF 31850 20800 0.78
UC209-27 1 11/16 85 49.2 22 19 30.2 8 6.8 5/16-24UNF 31850 20800 0.74
UC209-28 1 3/4 85 49.2 22 19 30.2 8 6.8 5/16-24UNF 31850 20800 0.7
UC209 45 85 49.2 22 19 30.2 8 6.8 M8X1 31850 20800 0.68
UC210-30 1 7/8 90 51.6 23 19 32.6 9 6.5 3/8-24UNF 35100 23200 0.87
UC210-31 1 15/16 90 51.6 23 19 32.6 9 6.5 3/8-24UNF 35100 23200 0.82
UC210 50 90 51.6 23 19 32.6 9 6.5 M10X1.25 35100 23200 0.8
UC211-32 2 100 55.6 25 22.2 33.4 9 7.2 3/8-24UNF 43550 29200 1.27
UC211-34 2 1/8 100 55.6 25 22.2 33.4 9 7.2 3/8-24UNF 43550 29200 1.17
UC211 55 100 55.6 25 22.2 33.4 9 7.2 M10X1.25 43550 29200 1.12
UC211-35 2 3/16 100 55.6 25 22.2 33.4 9 7.2 3/8-24UNF 43550 29200 1.1
UC212-36 2 1/4 110 65.1 27 25.4 39.7 10.5 8.2 3/8-24UNF 47800 32800 1.67
UC212 60 110 65.1 27 25.4 39.7 10.5 8.2 M10X1.25 47800 32800 1.53
UC212-38 2 3/8 110 65.1 27 25.4 39.7 10.5 8.2 3/8-24UNF 47800 32800 1.53
UC212-39 2 7/16 110 65.1 27 25.4 39.7 10.5 8.2 3/8-24UNF 47800 32800 1.45
UC213-40 2 1/2 120 65.1 28 25.4 39.7 12 8 3/8-24UNF 57200 40000 1.94
UC213 65 120 65.1 28 25.4 39.7 12 8 M12X1.25 57200 40000 1.86
UC214-44 2 3/4 125 74.6 30 30.2 44.4 12 9 7/16-20UNF 60800 45000 2.06
UC214 70 125 74.6 30 30.2 44.4 12 9 M12X1.25 60800 45000 2.05
UC215-47 2 15/16 130 77.8 30 33.3 44.5 12 9 7/16-20UNF 66000 49500 2.3
UC215 75 130 77.8 30 33.3 44.3 12 9 M12X1.25 66000 49500 2.21
UC215-48 3 130 77.8 30 33.3 44.5 12 9 7/16-20UNF 66000 49500 2.13
UC216 80 140 82.6 33 33.3 49.3 14 10.3 M12X1.25 71500 54200 2.79
UC217-52 3 1/4 150 85.7 35 34.1 51.6 14 11 7/16-20UNF 83200 63800 3.6
UC217 85 150 85.7 35 34.1 51.6 14 11 M12X1.25 83200 63800 3.38
UC218-56 3 1/2 160 96 37 39.7 56.3 14 12 1/2-20UNF 95900 71500 4.56
UC218 90 160 96 37 39.7 56.3 14 12 M12X1.25 95900 71500 4.45
GJP Bearing No. Shaft Dia. Dimensions(mm)(in.) Basic load ratings(N) Mass(kg) Interchange No.
d D B C S h G ds Dynamic Cr Static Cor
(in.) (mm)
SB201 12 40 22 12 6 3.6 4 M5X0.8 9550 4780 0.1 FHS201
SB201-8 1/2 40 22 12 6 3.6 4 10#-32UNF 9550 4780 0.1 FHS201-8
SB202 15 40 22 12 6 3.6 4 M5X0.8 9550 4780 0.1 FHS202
SB202-10 5/8 40 22 12 6 3.6 4 10#-32UNF 9550 4780 0.1 FHS202-10
SB203 17 40 22 12 6 3.6 4 M5X0.8 9550 4780 0.1 FHS203
SB203-11 11/16 40 22 12 6 3.6 4 10#-32UNF 9550 4780 0.1 FHS203-11
SB204-12 3/4 47 25 14 7 4 5 1/4-28UNF 12800 6650 0.14 FHS204-12
SB204 20 47 25 14 7 4 5 M6X1 12800 6650 0.14 FHS204
SB205-14 7/8 52 27 15 7.5 4.3 5.5 1/4-28UNF 14000 7880 0.17 FHS205-14
SB205-15 15/16 52 27 15 7.5 4.3 5.5 1/4-28UNF 14000 7800 0.17 FHS205-15
SB205 25 52 27 15 7.5 4.3 5.5 M6X1 14000 7880 0.17 FHS205
SB205-16 1 52 27 15 7.5 4.3 5.5 1/4-28UNF 14000 7880 0.17 FHS205-16
SB206-18 1 1/8 62 30 16 8 5 6 1/4-28UNF 19500 11200 0.26 FHS206-18
SB206 30 62 30 16 8 5 6 M6X1 19500 11200 0.26 FHS206
SB206-19 1 3/16 62 30 16 8 5 6 1/4-28UNF 19500 11200 0.26 FHS206-19
SB206-20 1 1/4 62 30 16 8 5 6 1/4-28UNF 19500 11200 0.26 FHS206-20
SB207-20 1 1/4 72 32 17 8.5 5.7 6.5 1/4-28UNF 25700 15200 0.39 FHS207-20
SB207-21 1 5/16 72 32 17 8.5 5.7 6.5 1/4-28UNF 25700 15200 0.39 FHS207-21
SB207-22 1 3/8 72 32 17 8.5 5.7 6.5 1/4-28UNF 25700 15200 0.39 FHS207-22
SB207 35 72 32 17 8.5 5.7 6.5 M6X1 25700 15200 0.39 FHS207
SB207-23 1 7/16 72 32 17 8.5 5.7 6.5 1/4-28UNF 25700 15200 0.39 FHS207-23
SB208-24 1 1/2 80 34 18 9 6.2 7 5/16-24UNF 29600 18200 0.54 FHS208-24
SB208-25 1 9/16 80 34 18 9 6.2 7 5/16-24UNF 29600 18200 0.54 FHS208-25
SB208 40 80 34 18 9 6.2 7 M8X1 29600 18200 0.54 FHS208
SB209-26 1 5/8 85 41.2 19 10.2 6.5 8.2 5/16-24UNF 31850 20800 0.68 FHS209-26
SB209-27 1 11/16 85 41.2 19 10.2 6.5 8.2 5/16-24UNF 31850 20800 0.68 FHS209-27
SB209-28 1 3/4 85 41.2 19 10.2 6.5 8.2 5/16-24UNF 31850 20800 0.68 FHS209-28
SB209 45 85 41.2 19 10.2 6.5 8.2 M8X1 31850 20800 0.68 FHS209
SB210-30 1 7/8 90 43.5 20 10.9 6.5 9.2 5/16-24UNF 35100 23200 0.8 FHS210-30
SB210-31 1 15/16 90 43.5 20 10.9 6.5 9.2 5/16-24UNF 35100 23200 0.8 FHS210-31
SB210 50 90 43.5 20 10.9 6.5 9.2 M8X1 35100 23200 0.8 FHS210
SB211-32 2 100 45.3 23 11.8 7.2 9.8 5/16-24UNF 43550 29200 1 FHS211-32
SB211-34 2 1/8 100 45.3 23 11.8 7.2 9.8 5/16-24UNF 43550 29200 1 FHS211-34
SB211 55 100 45.3 23 11.8 7.2 9.8 M8X1 43550 29200 1 FHS211
SB211-35 2 3/16 100 45.3 23 11.8 7.2 9.8 5/16-24UNF 43550 29200 1 FHS211-35
SB212-36 2 1/4 110 53.7 24 14.9 8 9.8 3/8-24UNF 47800 32800 1.3 FHS212-36
SB212 60 110 53.7 24 14.9 8 9.8 M10X1.25 47800 32800 1.3 FHS212
SB212-39 2 7/16 110 53.7 24 14.9 8 9.8 3/8-24UNF 47800 32800 1.3 FHS212-39
GJP Bearing No. Shaft Dia. Dimensions(mm)(in.) Basic load ratings(N) Mass(kg) Interchange No.
d D B C S h G ds Dynamic Cr Static Cor
(in.) (mm)
CSB201 12 40 22 12 6 3.6 4 M5X0.8 9550 4780 0.1 FHSR201
CSB201-8 1/2 40 22 12 6 3.6 4 10#-32UNF 9550 4780 0.1 FHSR201-8
CSB202 15 40 22 12 6 3.6 4 M5X0.8 9550 4780 0.1 FHSR202
CSB202-10 5/8 40 22 12 6 3.6 4 10#-32UNF 9550 4780 0.1 FHSR202-10
CSB203 17 40 22 12 6 3.6 4 M5X0.8 9550 4780 0.1 FHSR203
CSB203-11 11/16 40 22 12 6 3.6 4 10#-32UNF 9550 4780 0.1 FHSR203-11
CSB204-12 3/4 47 25 14 7 4 5 1/4-28UNF 12800 6650 0.14 FHSR204-12
CSB204 20 47 25 14 7 4 5 M6X1 12800 6650 0.14 FHSR204
CSB205-14 7/8 52 27 15 7.5 4.3 5.5 1/4-28UNF 14000 7880 0.17 FHSR205-14
CSB205-15 15/16 52 27 15 7.5 4.3 5.5 1/4-28UNF 14000 7800 0.17 FHSR205-15
CSB205 25 52 27 15 7.5 4.3 5.5 M6X1 14000 7880 0.17 FHSR205
CSB205-16 1 52 27 15 7.5 4.3 5.5 1/4-28UNF 14000 7880 0.17 FHSR205-16
CSB206-18 1 1/8 62 30 16 8 5 6 1/4-28UNF 19500 11200 0.26 FHSR206-18
CSB206 30 62 30 16 8 5 6 M6X1 19500 11200 0.26 FHSR206
CSB206-19 1 3/16 62 30 16 8 5 6 1/4-28UNF 19500 11200 0.26 FHSR206-19
CSB206-20 1 1/4 62 30 16 8 5 6 1/4-28UNF 19500 11200 0.26 FHSR206-20
CSB207-20 1 1/4 72 32 17 8.5 5.7 6.5 1/4-28UNF 25700 15200 0.39 FHSR207-20
CSB207-21 1 5/16 72 32 17 8.5 5.7 6.5 1/4-28UNF 25700 15200 0.39 FHSR207-21
CSB207-22 1 3/8 72 32 17 8.5 5.7 6.5 1/4-28UNF 25700 15200 0.39 FHSR207-22
CSB207 35 72

Inquiry

What is 7+4?

What is 7+4?

Related Products

UCFL2013 1667290968018 17

UCFL201-8 Two-bolt flange assembly

see more
2 7 8 pillow block bearing ucp215 46 for10286211289

2 7/8” Pillow Block Bearing UCP215-46 for Punching Machine

see more
master guide roller and combined bearing

GJP Master Guide Roller and Combined Bearing 83C285 B1 for forklift Truck

see more
hanger bearing

1” Hanger Bearing UCHA205-16

see more

Copyright © Xiamen Smark Bearing Co., Ltd. All Rights Reserved.

Contact Us

Categories

Links

Linkedin

Facebook

Google plus

QR Code

Pillow Block Bearing

Copyright © Xiamen Smark Bearing Co., Ltd. All Rights Reserved.