1 15/16” Cast Iron Pillow Block UCP210-31 Peer Type

Name: Customized Cast Iron Pillow Block Bearing-Gjp Bearing
SKU: 98462774420d

1 15 16 cast iron pillow block ucp210 31 peer23462390899 1

1 15 16 cast iron pillow block ucp210 31 peer17591295911 1

1 15/16'' Cast Iron Pillow Block UCP210-31 Peer Type

A cast iron pillow block bearing is a type of bearing that is commonly used in industrial and agricultural applications. The bearing is housed within a cast iron casing that provides both stability and protection for the rotating component within. Pillow block bearings are designed to support a shaft and keep it properly aligned, allowing it to rotate freely. They are commonly used in conveyor systems, pumps, fans, and other rotating machinery. Cast iron pillow block bearings are durable and resistant to corrosion and wear, making them well suited for harsh operating environments.

SKU 98462774420d Category Pillow Block Bearing Tag cast iron pillow block bearing

Product Details

Description-1 15/16” Bore Cast Iron Pillow Block Bearing Unit UCP210-31

GJP Bar Code Number: 6935329802254

GJP 1 15/16″ Cast Iron Pillow Block bearing UCP210-31 Peer Type, which has grease fitting and cap on 45 degree angle, and the insert bearing has a wide inner ring with two set screws for locking on the shaft, bearing insert and housing are normally assemblied with J7 tight fitting, this items are widely used.

Cast iron pillow block bearing has the following characteristics:

During the operation, cast iron pillow block bearing has low noise, corrosion resistance, and is widely used. It can be produced in batches, with high strength and high precision.
Cast iron pillow block bearing can be used in various products that are easy to rust and strong corrosion.
Compared with ordinary bearing steel, cast iron pillow block bearing has stronger anti-rust and anti-corrosion properties. Choose appropriate lubricants, dust caps, etc., and can be used in the environment of -60℃ ~ +300℃.
Cast iron pillow block bearing is widely used in food processing, equipment and pharmaceutical machinery due to its high mechanical strength and large load capacity.

These cast iron pillow blocks are dimensionally interchangeable with ball bearing pillow blocks. Used where ball bearings have failed due to environment or temperature. These housings can also be provided in stainless steel and plastic composites.

Interchange

GJP: UCP210-31

AMI: UCP210-31

IPTCI: UCP210-31

NSK: UCP210-31

NTN: UCP210-115D1

Peer: FHSP210-31G

Fafnir: RASC-1 15/16”

Fafnir: YAS-1 15/16”

RHP: NP-1 15/16”

SKF: SY 1 15/16”TF

Sealmaster: NP-31

Basic Dimensions
Bore Size	Center Shaft to Base Size	Housing Length	Center Bolt to Bolt Size	Housing Width	Housing Bolt Length	Housing Bolt Width	Housing Height	Bolt Size
1 15/16″	57.2MM	206MM	159MM	60MM	25MM	20MM	114MM	5/8″

Technical Data for GJP UCP210-31

Housing No.: P210

Bearing Insert No.: UC210-31

Material For Bearing Insert: 100% Chrome Steel Gcr15(AISI 52100)

Grade For Steel Ball: G10 Grade Chrome Steel Ball.

Materia of Bearing Cage: #10 Steel

Stopping Pin Material on OD of OR: Chrome Steel Gcr15

Sealing Type: F Seal, L3 Seal And Normal NBR Seal are available for customers’selection.

Set Screw Material: 35CrMo

Grease: 20% to 50% Mobil Grease

Set Screw Surrounding Hardness: HRC49 to HRC 50

Bearing Race and Steel Ball Hardness: HRC59 to HRC62

Bearing Housing Material: HT200 Grey Cast Iron

Housing Color: Green, Blue, Grey, Black Color available.

Whole Unit Assembly Type: J7 Tight Fitting

Housing Weight: 1.83KGS

Quality Control: Under ISO: 9001: 2008 Certificate

Package: 1*1 Single GJP poly bag+1*1 Single GJP color box+1*1 GJP outer carton

FAQ

If our purchasing items are non-standard type of bearings, is there any minimum order quantity requirements from your factory?

Yes, if it’s special type of bearings, as we need to open the new mold, if your order quantity is too small, then the prices are quite expensive and because some items might need the special bar or forging material, if small quantity, we could not get the material from outsides, besides, for the cage or steel ball and seals, we need some mimimum order quantity also, so there is MOQ request for the special bearings, at present, we could not tell you what’s the MOQ quantity we need, as it depends on your projects and how’s the bearing look like? But for the standard type, no order is too big or too small for us, we could try the best to help customers.